House freezing and energy bills doubled in Hamilton?
Your attic insulation is probably the problem. Here's how blown in insulation fixes it.
Your heating bill jumped this winter and some rooms stay cold no matter how high you turn the thermostat. You can feel drafts but can't figure out where they're coming from. Hamilton homeowners see this every winter when old attic insulation stops working.
Most heat escapes through your attic, not your windows or doors. If you can see wooden floor joists through your attic insulation, you're losing heat fast. Old insulation settles and compresses over time, leaving gaps where warm air escapes. This forces your furnace to run constantly.
Blown in attic insulation typically costs $1.50 to $3.50 per square foot in Hamilton. A standard 1,200 square foot attic runs $1,800 to $4,200 installed. The price depends on how much insulation you already have and what R-value you need. Most Hamilton homes need R-38 to R-60 for proper thermal protection.
Check your attic first. If insulation doesn't cover the floor joists completely, you need more. Get quotes from licensed contractors who use Owens Corning AttiCat or similar blown fiberglass. Central Insulation Systems Inc. has installed attic insulation across Ohio since 1988 and can assess what your house needs. Compare R-values, not just price.
Proper attic insulation keeps upstairs rooms warmer and cuts heating bills 15-30%. Your furnace won't cycle as often. Drafts disappear when heated air stops escaping through the roof. Most homeowners see payback in 2-3 years through lower energy costs.
What people in Hamilton say
"THEY DID A GOOD JOB AND I THOUGHT THE PRICE WAS REASONABLE."
"Excellent abatement contractor"
"As a Contractor, who works with homeowners, helping them with their Roofing and Siding Projects, Kevin and his Team, have been relied upon, again and again, by me and/or my Company. They do fantastic work, have a tremendous amount of expertise, and I cannot recommend them enough!"
Other things people in Hamilton ask
asbestos floor tiles removal
Stop all work immediately. Do not sand, scrape, or break the tiles. Get a sample tested by a certified lab first. If it tests positive, hire a licensed asbestos abatement contractor. DIY removal is illegal in most areas and dangerous.
asbestos pipe insulation basement boiler
Stop going in that area immediately. Do not touch or disturb the insulation. Crumbling asbestos pipe insulation releases dangerous fibers. Get it tested professionally. The 2 options are to have it covered with special encapsulating material or have it removed by a licensed abatement contractor.
blown in attic insulation cost
Blown-in fiberglass costs $1.50-3.00 per square foot installed. Price depends on R-value needed and attic access. For a 1200 sq ft attic, expect $1800-3600 total. Cheaper quotes often mean lower R-value.
how much does asbestos removal cost
Asbestos removal cost depends on square footage, material type, and access difficulty. Pipe insulation runs $15-25 per linear foot. Floor tiles cost $5-15 per square foot. Get three licensed quotes and compare line items, not just total price.
can I remove asbestos myself DIY
No. DIY asbestos removal is illegal in most states and extremely dangerous. You need special licenses, containment equipment, and disposal permits. One mistake can contaminate your entire house and put your family at risk.
Ready to talk?
Central Insulation Systems sells blown in insulation for Hamilton and the area around it.